| Contact |
 |
 |
0769-8310 3566 |
 |
Ard@ardpress.com |
 |
No. 19, Juxin Third Road, Xiangwei village, Dalang Town |
|
|
|
|
| What is the phenomenon of material slip of servo feeder in stamping machinery? |
| Date:2021-11-22 |
Punch servo feeder is a common material conveyor in stamping industry, which is conducive to improve the production efficiency of enterprises and save labor costs for enterprises. With the wide use of machines, we will encounter some problems more or less in practical use. For example, the material of punch servo feeder slips. In the view of the industry, this is a relatively troublesome problem, because material slippage will cause a series of problems, such as the material can not be sent to the position, the position is inaccurate, the crushed mold parts are unqualified and so on. Therefore, how should we deal with the slip of machine materials? Let's follow the small series of stamping machinery to have a simple understanding!
1. What we need to do is to find out the cause of the problem and check the cylinder management of the pneumatic device of the servo feeder. When the air pressure is insufficient or the air pipe is insufficient, the air pressure is low, and the pressure spring is insufficient when clamping the material. If the material is too thick, it is easy to slide if it is not tightly clamped. At this time, another air pipe must be connected to the cylinder on the solenoid valve so that the cylinder has thrust to clamp the roller on the servo feeder more tightly. It will not slip and can also be achieved by increasing the cylinder pressure by increasing the intake pressure.
2. When the feeding speed of the servo feeder can be met, the distance between the servo feeder and the straightener or material rack shall be shortened as far as possible to reduce the waiting area, so as to reduce the weight of the material in the waiting area, so as to reduce its load and prevent the material from being overweight and slipping in the waiting area of the pressure servo feeder.
3. Check whether the power spring of the feeding leveling roller is qualified and whether the rebound force meets the requirements. If it fails to meet the requirements, it is necessary to replace a new spring and increase the pressure.
The above is about how to deal with the material slip of the servo feeder. You can learn more about it. |
|
|
|
Chinese
ENGLISH
